Why is my filament coming out like this?
For some reference I’ve got: • inland matte PLA, 1.75mm • nozzle temp at 200°C (recommended 190°C-230°C) • retraction 5mm • retraction speed 25mm • Z distance at 0.16mm • X/Y distance at 0.8mm • Z hop enabled • comb distance at 10mm
For some reference I’ve got: • inland matte PLA, 1.75mm • nozzle temp at 200°C (recommended 190°C-230°C) • retraction 5mm • retraction speed 25mm • Z distance at 0.16mm • X/Y distance at 0.8mm • Z hop enabled • comb distance at 10mm